Mini Portable Sewing Machine with Kit, Extension Table, Foot Pedal, 2-Speed & Dual Switches – Perfect for Beginners & Kids

Prodcut Advantages:

1.Two-Speed Mode allows you to adjust the speed according to your needs.

2.Dual Power operation makes it possible to start sewing enywhere.

3.Foot Pedal provides moderate bounce.

4.Extension Table helps to work on large projects.

5.Provide sewing machine and sewing kit, Meet various sewing needs.

6.The machine with operating instructions. There is no need to read the instructions when using it again. It is more intuitive, simple to operate and easy to learn for beginner or kids.

How to lift the bottom line:

1.Remove bobbin cover and Insert coil.

2.Rotate the hand wheel one turn clockwise,press the foot switch to lower the presser foot.

3.Take hold of the line and straighten it,rotate the hand wheel one turn clockwise.

4.After straightening,you can see the superfluous line.Pull the line out.

5.Make one turn and straighten the line.Pull the upper thread outward so that the bottom thread is pulled out.

6.Put the bobbin cover on.

Sew:

1.Plug in power adapter and foot pedal(Tip:when there is no power supply you can use it as on manual).

2.Install the extension stand on sewing machine.

3.Lift the presser foot and place the two wires behind.Move the fabric from under the presser foot to the sewing location.

4. Rotate the handwheel clockwise once before sewing, the needle through the fabric first.

5.Press the switch to sew or use the pedal to sew.

Safety Notice:

1.Don’t touch the needle when using the sewing machine.

2.Children should use sewing machine under the supervision of adults.

3.Power lines should be kept away from fire source.

4.Make sure your hands are dry when use sewing machine.

5.Do‘t immerse the portable sewing machine and parts in water.

6.You can’t sew clothes until you’ve taken them off.

Error Usage Method:

1. Didn’t thread according to steps 1-8.

2. Didn’t place the bottom line and upper line parallel forward and passing under the presser foot after pulling out the bottom line.

3. Didn’t put down the presser foot before sewing.

4. Didn’t rotate the handwheel clockwise once before sewing, thread the needle through the fabric first, and then press the switch.